ZMDI signal conditioner IC features dual analog output

ZMDI AG (www.zmdi.com) has added the ZSSC3154 to its ZSSC family of signal sensor conditioners for automotive and industrial applications.

With the ZSSC3154, two different input signals, such as a pressure signal from a resistive full bridge and temperature from an external temperature sensor (diode or positive temperature coefficient (PTC) resistor), are read out using one IC.

The ZSSC3154 also measures the temperature of the full bridge sensor either externally or directly on the chip to compensate for the sensor’s offset, gain and temperature coefficient up to the second order and non-linearity failures up to the third order. The signal from the ambient temperature sensor is also digitally compensated for offset, gain and non-linearity up to the second order. These digital corrections are performed by a 16-bit RISC microcontroller using coefficients and settings stored in an on-board EEPROM memory.

Different programmable configurations of the two analog outputs allow reading both measurement results simultaneously or generating two complementary (normal and antivalent) signals from the full-bridge sensor for controlling the correct sensor-to-module communication over time.

“The various configurable output options of the two analog output channels allow our customers to setup applications with redundant output signals. An example of application areas for the ZSSC3154 may include automotive ABS/ESC applications” stated Frank Schulze, Business Line Manager for Sensing and Automotive at ZMDI.

The ZSSC3154 allows a digital one-pass end-of-line calibration with integrated broken-chip detection, enabling fully automatic and highly efficient mass production for non-calibrated sensing elements. The IC is available as die or in a QFN32 5×5 mm plastic package compliant with the JEDEC standard. The ZSSC3154 is qualified according to AEC-Q100 automotive standards for an operational temperature range between -40° and +125°C.

The unit price is €4,60 /$6.22 for packaged parts in tubes with a minimum order of 1000 ICs or €1,56 / $2.11 for die on frame with a minimum order of 10,000 die. The IC is available for volume production.

Benefits and Features of the ZSSC3154:

Dynamic

- Various configurable output options

- Safety output behavior via two antivalent analog outputs

Accurate

- Simultaneous measurement of sensor signal and temperature signal for compensation and ambient temperature

Effective

- Efficient use of non-calibrated elements for bridge and ambient temperature sensors without external trimming components

Cost Efficient

- Single-pass end-of-line calibration algorithm and broken-chip detection minimize production costs

Robust

- High EMC/ESD robustness and AEC-Q100 qualification

Other posts you may be interested in reading:

1. Analog Devices offers 5 kV rms signal-only isolated CAN transceiver rated to 125˚C
2. Maxim dual, 2-wire, Hall-effect sensor interface provides flexibility through analog and digital outputs
3. Linear LTC3865/1 dual synchronous step-down DC/DC controller offers 1% accurate pin-selectable output voltages